Residential Electrician

In need for an electrician quickly for an electrical short or emergency? Our engineers are 24/7 available:

24 hour Emergency Electrician

We work in the entire The Hague region. Delft, Voorburg, Scheveningen, Leidschendam, Wassenaar, Den Haag, Voorburg, Rijswijk, Leiden, Wateringen, Monster, Zoetermeer, Voorburg, Rotterdam, The Hague,

Some of our services include: 

Lighting Design, Exit & Emergency Lighting, Emergency Service, Fault Finding & Repairs, RCD Testing, Safety Switches, Testing & Tagging, Data & Communication, Audio & Visual, Thermal Graphic Scanning, Data & Communications,  Security, Alarms & CCTV, Under-Tile Heating, 

Do you have a domestic electricity emergency in South-Holland, are you worried, and do you need immediate assistance straight away? Speak to our experts at South-Holland Electricians 24/7 and we’ll have a Electrician with you in no time. Call us anytime on 06 26116947

Is your electrical installation up-to-date?

Reason To Get Your Electrical Switchboards Inspected If you have an old switchboard then get it inspected and, if necessary, replaced. If you have concerns about the safety of your family then get a switchboard inspection. Have you upgraded other electricals in the house, added extra electrical devices to your home, without checking to see if your switchboard is capable? You want surge protection added to your switchboard Other Electrical Switchboard Services DutchElektro can relocate your current switchboard to another location if it’s in a hard-to-reach location, or you’re required to open the gate to allow Energex to read your meter each time.

DutchElektro 06 26116947

Our Electrical Services not only save Money but they provide Peace of Mind! For Your total Electrical needs,
Give us a Chance To save you Money. When you hire us, the Dutch Elektro Electrician is actually on the job.

Lighting Projects / Construction Projects
Install Contracts
General Electrical Services
In and Out of State
Electrician Services


Electrical Testing & Inspection DutchElektro  DutchElektro Electricians 247, our qualified team are able to provide an all-encompassing electrical testing and inspection service for both commercial and domestic buildings. With more than 30 years’ experience operating in our field, we can assist in reducing the occurrence of serious faults, along with the need to replace your old system following a breakdown. With a broad range of accreditations, qualifications and experience to draw from, you can trust in our ability to provide professional advice that is tailored to your specific needs. We are proud of our dedication to customer service and the fantastic reputation it has gained us over the years, so you can rely on us to offer advice in line with what would work best for you; while providing the highest quality workmanship through precision and a strong understanding of electrical systems.

Troubleshooting Common Problems With Light Fixtures call
Common Problems With Recessed Lights (Can Lights)

Recessed canister lights are subject to some of the same problems found in ordinary ceiling light fixtures. In addition, sometimes a recessed light fixture may mysteriously go on and of by itself. This is because recessed lights are equipped with limit switches designed to turn a fixture off automatically if the heat reaches an unsafe level. This can be for one of several reasons:

Check to see if the lightbulbs in the light fixture have the proper wattage for the light fixture. If the wattage is too high, it may be causing the fixture to overheat. Compare the wattage on the light bulb with the rating printed on the light fixture. Install a lower-wattage lightbulb, if necessary.
If insulation is packed too tightly around the light fixture, it may be trapping heat around the light fixture canister, causing the limit switch to overheat and shut down the light fixture. Make sure there is enough air circulation around the canister, which will prevent the fixture from overheating.
The limit switch may be faulty. If the light bulb wattage is correct and there seems to be proper ventilation around the light fixture, then consider replacing the limit switch or the entire light fixture.

DutchElektro Electrical Services Why not make DutchElektro Electrical Services your dedicated commercial maintenance electrician? Having someone who understands your business or organisational needs and can deliver consistent, quality service when you need it just makes life easier.

Flickering Lights

If your lights are flickering, buzzing, or not turning on and off, it could mean that the wattage is wrong.

Alternatively, there may be a bad connection between the bulb and switch. If replacing the bulb doesn’t help,

Dutch Elektro will be able to establish the root cause and get your lights shining again.

We’ve all faced electrical faults in the home, and while sometimes it’s easy to find out the cause, most of the time it leaves us pretty baffled. And while there’s never a good time for electrical faults, it usually always happens at the worst possible time, and it can also be dangerous, too.  It goes without saying that you should always contact a certified electrician if you are ever concerned about the condition of the electrics in your home. Flickering lights can drive you up the wall but the cause of the problem can often be easier to identify than you think. For example, it could be:

A dimmer switch that’s not compatible
A loose connection somewhere in the circuit
A damaged cable which could be trapped under a floorboard which is losing connection every time someone treads on it
A broken light switch

Low beam switches
Low beam switches are a common source of flickering with LED lamps. Older dimmers and current conventional dimmers are designed for use with incandescent lamps and they often do not work well with LED lamps. If your LED is controlled by a dimmer, the simplest solution is to buy a solid “dimmable” LED lamp. If this does not resolve the problem, replace the old dimmer with a new one designed for LED lamps. You will still have to use dimmable LEDs, but the new switch will be optimized for LEDs and will probably offer you better performance. We can help you very well call us